As you probably know, mining machines produce a lot of noise. As far as home mining is concerned, it is almost impossible without some form of soundproofing in your space. ASICMINERBOX is constructed with a double wall using soundproofed material.
Additionally, insulated hoses also reduce noise. We recommend using insulated hoses on both sides (air input/output) to lower noise levels.
One primary reason machines break down is due to dust and waste that blow into the hashboards. The dust acts as an insulating material, so heat is unable to be distributed away from the hashboards. In our design, this problem is 100% solved. The air entering the machines' operating zone passes through a large area of very dense filters that do not transfer any dust into the operating zone. In this way, you rarely have to clean the machines.
The whole construction is mounted on six feet with special heavy anti-vibration tires.
FEATURES/ INTEGRATED ELECTRICAL SYSTEM
No electrical distribution is needed in your home/facility. Simply connect power to the box (three-phase). Everything else is already in the box, as it comes with its own wires, electrocution protections and breakers. For the safety of the miners, we also built in a 3-phase voltage control relay and a delay regulator to protect the machines from any power-related issues.
For detailed electrical information, refer to the technical specifications of each model.
ELECTRICAL DISTRIBUTION PANEL
As you know, miners are sensitive machines in terms of power supply. There are two additional levels of protection in our box - a 3-phase voltage control relay and a delay regulator - resulting in 100% safety for your miners.
1. Protect your miners from Over or Under Voltage with a voltage monitor that shuts off the miners and keeps them closed for the duration of any problem.
2. Protect your miners from power fluctuation. If your provider makes quick power outages, your miners stay off until the problem is solved and turn on after an extra delay to avoid continuous switching on/off in a short period.
Simply connect power to the box (three-phase). The socket is built in, and you must connect the plug (included) with the power cable.
FEATURES/ AUTOMATIC OPERATING SYSTEM
AUTO-MODE USING 3 TEMP SENSORS
Carefree mining - Three temperature sensors are located in the box to monitor your operation temperature in real time. The miners run as long as the temperatures stay under the set limits (adjustable temp settings). All miners (or a few) will automatically turn off when the turn-off limits are triggered. The miners will also turn back on automatically as soon as the temperature drops and triggers the turn-on mode.
UPS BACK UP
Stay connected with your box after a power failure with a built-in UPS backup power system. If the power goes off or there is a short circuit, for example, and the box turns off, you can still enjoy remote access. The router, network switches, led lights and even the mini pc/screen* and cameras* you have in your space will remain powered.
The UPS powers all control and monitoring systems so we can always maintain a complete picture of what is happening in the area where the box is placed. The box will also turn back on automatically as soon as the box receives stable power to turn on the miners.
*Mini pc/screen not included
AIR VENT FLAP COVERS
When the temperature starts rising (during the summer months), and the miners reach the hot range, two or four miners (depending box model) turn off to keep the other miners operational. The miners will also turn back on automatically as soon as the temperature drops, triggering the turn-on mode. So during the year's hot season, by adjusting the temp limits correctly, you can operate with 2-4 fewer miners per day instead of turning off all miners. The miners that could be turned off due to high temperatures have an air vent flap cover to avoid hot air moving back from the hot air zone to the cold air zone.
Enjoy total control over your complete mining operation via a mobile app. You can remotely switch the miners, router, network switches, mini pc/screen* and cameras* on and off. Miners can't be switched on and off individually. You have total control anywhere, any time, even in the event of a power blackout (powered by UPS).
All operations and functionalities of the box can be accessed and controlled through the control panel inside the box and the mobile app on your phone.
*Mini Pc/Screen and camera's not included
FEATURES/ AIR COOLED
The box comes with four x 500mm cross-section air duct connectors to connect the air hoses, two for the air inlet and two for the air outlet. You have to connect flexible air hoses, which you will direct to an outside environment, for example, via a window or roof space. We recommend buying 508mm flexible insulated hoses with stone wool, which you can easily find in your local market.
The idea behind the whole box operation is that we create negative pressure due to our airtight design. The miners (operating as one big fan), having nowhere else to suck air, create negative pressure inside the box, resulting in a considerable inflow of air. This idea has multiple advantages: super efficient energy, noise and temperature management. Exhaust fans aren't required.
The miners operate in a sealed, airtight box. The reason for this is three-fold; firstly, negative pressure is created inside. Secondly, the box has a heavy noise-reducing double wall enclosure and thirdly, the air we want the machines to suck is filtered by special filters placed in the air inlet zone. As a result, the machines operate quietly and with clean air.